Greetings all,
My nice MBA got rained on the other day, so I'm stuck with what appears to be a second edition, "five-flavours," PowerPC "Firewire" iMac, http://lowendmac.com/1999/400-mhz-imac-dv-late-1999 . I've run ubuntu 13.10 on it just fine before, X11 working and all. But support on that release ended some time ago, so I reinstalled the machine with 14.04.
X11 is now broken. The screen on virtual console 7 is just black. I can switch to other virtual consoles and see text and the system is otherwise running fine. I've tried a number of the remedies listed on various forums with no real results, so after all that tweaking I reinstalled 14.04 once again to start from a freshly-installed system. I did run apt-get update and upgrade to bring things up to current. Please see Xorg.0.log below.
Would anyone happen to be familiar with this failure mode, or do I need to become an expert?
thx
jake
root@bluthing:~# !!
cat /var/log/Xorg.0.log
[ 58.915]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 58.915] X Protocol Version 11, Revision 0
[ 58.934] Build Operating System: Linux 3.13.0-45-powerpc64-smp ppc Ubuntu
[ 58.934] Current Operating System: Linux bluthing 3.13.0-24-powerpc-smp #47-Ubuntu SMP Sat May 3 02:03:13 UTC 2014 ppc
[ 58.934] Kernel command line: root=UUID=f3500dc8-f781-499f-856c-5e81193afaf5 ro quiet splash
[ 58.935] Build Date: 12 February 2015 02:53:48PM
[ 58.935] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 58.935] Current version of pixman: 0.30.2
[ 58.935] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 58.935] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 58.966] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 3 21:19:52 2015
[ 59.000] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 59.021] (==) No Layout section. Using the first Screen section.
[ 59.022] (==) No screen section available. Using defaults.
[ 59.022] (**) |-->Screen "Default Screen Section" (0)
[ 59.022] (**) | |-->Monitor "<default monitor>"
[ 59.034] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 59.045] (**) | |-->Device "Card0"
[ 59.045] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 59.045] (==) Automatically adding devices
[ 59.045] (==) Automatically enabling devices
[ 59.045] (==) Automatically adding GPU devices
[ 59.056] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 59.057] Entry deleted from font path.
[ 59.057] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 59.057] Entry deleted from font path.
[ 59.057] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 59.068] Entry deleted from font path.
[ 59.068] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 59.068] Entry deleted from font path.
[ 59.068] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 59.069] Entry deleted from font path.
[ 59.069] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 59.069] (==) ModulePath set to "/usr/lib/powerpc-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 59.069] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 59.069] (II) Loader magic: 0x20837694
[ 59.069] (II) Module ABI versions:
[ 59.076] X.Org ANSI C Emulation: 0.4
[ 59.076] X.Org Video Driver: 15.0
[ 59.077] X.Org XInput driver : 20.0
[ 59.077] X.Org Server Extension : 8.0
[ 59.122] (--) PCI:*(0:0:16:0) 1002:5052:1002:5052 rev 0, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[ 59.137] Initializing built-in extension Generic Event Extension
[ 59.137] Initializing built-in extension SHAPE
[ 59.137] Initializing built-in extension MIT-SHM
[ 59.137] Initializing built-in extension XInputExtension
[ 59.138] Initializing built-in extension XTEST
[ 59.138] Initializing built-in extension BIG-REQUESTS
[ 59.138] Initializing built-in extension SYNC
[ 59.138] Initializing built-in extension XKEYBOARD
[ 59.138] Initializing built-in extension XC-MISC
[ 59.138] Initializing built-in extension SECURITY
[ 59.151] Initializing built-in extension XINERAMA
[ 59.153] Initializing built-in extension XFIXES
[ 59.153] Initializing built-in extension RENDER
[ 59.153] Initializing built-in extension RANDR
[ 59.153] Initializing built-in extension COMPOSITE
[ 59.153] Initializing built-in extension DAMAGE
[ 59.154] Initializing built-in extension MIT-SCREEN-SAVER
[ 59.154] Initializing built-in extension DOUBLE-BUFFER
[ 59.154] Initializing built-in extension RECORD
[ 59.154] Initializing built-in extension DPMS
[ 59.154] Initializing built-in extension Present
[ 59.165] Initializing built-in extension DRI3
[ 59.165] Initializing built-in extension X-Resource
[ 59.165] Initializing built-in extension XVideo
[ 59.165] Initializing built-in extension XVideo-MotionCompensation
[ 59.165] Initializing built-in extension SELinux
[ 59.165] Initializing built-in extension XFree86-VidModeExtension
[ 59.165] Initializing built-in extension XFree86-DGA
[ 59.166] Initializing built-in extension XFree86-DRI
[ 59.166] Initializing built-in extension DRI2
[ 59.166] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 59.166] (II) "glx" will be loaded by default.
[ 59.166] (WW) "xmir" is not to be loaded by default. Skipping.
[ 59.166] (II) LoadModule: "glx"
[ 59.213] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.501] (II) Module glx: vendor="X.Org Foundation"
[ 59.501] compiled for 1.15.1, module version = 1.0.0
[ 59.502] ABI class: X.Org Server Extension, version 8.0
[ 59.502] (==) AIGLX enabled
[ 59.502] Loading extension GLX
[ 59.502] (II) LoadModule: "r128"
[ 59.530] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 59.531] (II) Module r128: vendor="X.Org Foundation"
[ 59.531] compiled for 1.15.0, module version = 6.9.2
[ 59.531] Module class: X.Org Video Driver
[ 59.531] ABI class: X.Org Video Driver, version 15.0
[ 59.554] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 59.582] (++) using VT number 7
[ 59.585] (II) R128(0): PCI bus 0 card 16 func 0
[ 59.585] (II) R128(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 59.585] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[ 59.585] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 59.586] (==) R128(0): Default visual is TrueColor
[ 59.586] (**) R128(0): Option "UseFBDev" "False"
[ 59.586] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
[ 59.586] (==) R128(0): RGB weight 888
[ 59.586] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 59.587] (II) Loading sub module "int10"
[ 59.587] (II) LoadModule: "int10"
[ 59.599] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 59.612] (II) Module int10: vendor="X.Org Foundation"
[ 59.612] compiled for 1.15.1, module version = 1.0.0
[ 59.612] ABI class: X.Org Video Driver, version 15.0
[ 59.613] (II) R128(0): initializing int10
[ 59.622] (**) R128(0): Option "NoINT10" "True"
[ 59.623] (--) R128(0): Chipset: "ATI Rage 128 Pro VR PR (PCI)" (ChipID = 0x5052)
[ 59.623] (--) R128(0): Linear framebuffer at 0x94000000
[ 59.623] (--) R128(0): MMIO registers at 0x90000000
[ 59.628] (--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
[ 59.628] (**) R128(0): Using external CRT for display
[ 59.629] (WW) R128(0): Failed to read PCI ROM!
[ 59.638] (WW) R128(0): Video BIOS not found!
[ 59.638] (II) R128(0): Primary Display == Type 3
[ 59.638] (WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
[ 59.639] (II) R128(0): PLL parameters: rf=2950 rd=26 min=12500 max=25000; xclk=7150
[ 59.639] (II) Loading sub module "ddc"
[ 59.639] (II) LoadModule: "ddc"
[ 59.650] (II) Module "ddc" already built-in
[ 59.651] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 59.659] (II) Loading sub module "i2c"
[ 59.659] (II) LoadModule: "i2c"
[ 59.659] (II) Module "i2c" already built-in
[ 59.665] (II) R128(0): I2C bus "DDC" initialized.
[ 59.666] (II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
[ 59.682] (EE) R128(0): No DFP detected
[ 59.693] (II) R128(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 59.693] (II) R128(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 59.693] (II) R128(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 59.694] (WW) R128(0): Unable to estimate virtual size
[ 59.694] (II) R128(0): Clock range: 12.50 to 250.00 MHz
[ 59.694] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[ 59.694] (II) R128(0): Not using default mode "320x175" (vrefresh out of range)
[ 59.694] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[ 59.703] (II) R128(0): Not using default mode "320x200" (vrefresh out of range)
[ 59.703] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[ 59.703] (II) R128(0): Not using default mode "360x200" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 59.728] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.728] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 59.730] (II) R128(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 59.731] (II) R128(0): Not using default mode "512x384i" (vrefresh out of range)
[ 59.731] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 59.748] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 59.748] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 59.748] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 59.750] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 59.750] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 59.751] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 59.751] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 59.751] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 59.771] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "416x312" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.789] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.789] (II) R128(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 59.790] (II) R128(0): Not using default mode "1360x768" (mode clock too high)
[ 59.790] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "1440x900" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "720x450" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "1600x1024" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "800x512" (hsync out of range)
[ 59.805] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.805] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.805] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "1920x1080" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "960x540" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "1920x1200" (insufficient memory for mode)
[ 59.807] (II) R128(0): Not using default mode "960x600" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 59.816] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 59.816] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 59.816] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.817] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 59.817] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.817] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 59.817] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.817] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[ 59.817] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 59.818] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 59.818] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 59.818] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 59.818] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 59.818] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 59.818] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 59.819] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 59.819] (**) R128(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 59.819] (II) R128(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 59.819] (**) R128(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 59.819] (II) R128(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 59.819] (**) R128(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 59.837] (II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 59.837] (**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 59.837] (II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 59.837] (**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 59.838] (II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 59.838] (**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[ 59.838] (II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 59.838] (==) R128(0): DPI set to (96, 96)
[ 59.838] (II) Loading sub module "fb"
[ 59.838] (II) LoadModule: "fb"
[ 59.865] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 59.879] (II) Module fb: vendor="X.Org Foundation"
[ 59.879] compiled for 1.15.1, module version = 1.0.0
[ 59.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.879] (II) Loading sub module "ramdac"
[ 59.890] (II) LoadModule: "ramdac"
[ 59.892] (II) Module "ramdac" already built-in
[ 59.895] (II) Loading sub module "shadowfb"
[ 59.896] (II) LoadModule: "shadowfb"
[ 59.911] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 59.925] (II) Module shadowfb: vendor="X.Org Foundation"
[ 59.925] compiled for 1.15.1, module version = 1.0.0
[ 59.926] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.926] (II) R128(0): Page flipping disabled
[ 59.926] (!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 59.926] (--) Depth 24 pixmap format is 32 bpp
[ 59.939] (II) R128(0): Acceleration of RENDER operations will be enabled upon successful loading of DRI and EXA
[ 59.954] (WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
[ 59.955] (II) R128(0): Filling in EXA memory info
[ 59.955] (II) R128(0): Loading EXA module...
[ 59.955] (II) Loading sub module "exa"
[ 59.955] (II) LoadModule: "exa"
[ 59.968] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 59.970] (II) Module exa: vendor="X.Org Foundation"
[ 59.970] compiled for 1.15.1, module version = 2.6.0
[ 59.982] ABI class: X.Org Video Driver, version 15.0
[ 59.982] (II) R128(0): Allocating EXA driver...
[ 59.983] (II) R128(0): Acceleration enabled
[ 59.983] (II) R128(0): Filled in offs
[ 59.983] (II) R128(0): Going to init EXA...
[ 59.983] (II) R128(0): Setting up EXA callbacks
[ 59.983] (II) R128(0): Initalizing 2D acceleration engine...
[ 59.990] (II) R128(0): Initializing EXA driver...
[ 59.991] (II) EXA(0): Offscreen pixmap area of 5242880 bytes
[ 59.991] (II) EXA(0): Driver registered support for the following operations:
[ 59.991] (II) Solid
[ 59.996] (II) Copy
[ 59.996] (II) R128(0): EXA Acceleration enabled
[ 59.998] (==) R128(0): Backing store enabled
[ 59.998] (==) R128(0): Silken mouse enabled
[ 60.001] (II) R128(0): Using hardware cursor (scanline 8190)
[ 60.024] (==) R128(0): DPMS enabled
[ 60.025] (WW) R128(0): Direct rendering disabled
[ 60.025] (==) RandR enabled
[ 60.558] (II) SELinux: Disabled on system
[ 60.631] (II) AIGLX: Screen 0 is not DRI2 capable
[ 60.643] (EE) AIGLX: reverting to software rendering
[ 61.090] (II) AIGLX: Loaded and initialized swrast
[ 61.094] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 62.123] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 62.392] (II) config/udev: Adding input device PowerMac Beep (/dev/input/event1)
[ 62.394] (II) No input driver specified, ignoring this device.
[ 62.394] (II) This device may have been added with another device file.
[ 62.425] (II) config/udev: Adding input device Mitsumi Electric Apple USB Keyboard (/dev/input/event2)
[ 62.433] (**) Mitsumi Electric Apple USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.434] (II) LoadModule: "evdev"
[ 62.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.487] (II) Module evdev: vendor="X.Org Foundation"
[ 62.487] compiled for 1.15.0, module version = 2.8.2
[ 62.488] Module class: X.Org XInput Driver
[ 62.488] ABI class: X.Org XInput driver, version 20.0
[ 62.488] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple USB Keyboard'
[ 62.489] (**) Mitsumi Electric Apple USB Keyboard: always reports core events
[ 62.489] (**) evdev: Mitsumi Electric Apple USB Keyboard: Device: "/dev/input/event2"
[ 62.489] (--) evdev: Mitsumi Electric Apple USB Keyboard: Vendor 0x5ac Product 0x201
[ 62.490] (--) evdev: Mitsumi Electric Apple USB Keyboard: Found keys
[ 62.490] (II) evdev: Mitsumi Electric Apple USB Keyboard: Configuring as keyboard
[ 62.490] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event2"
[ 62.501] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple USB Keyboard" (type: KEYBOARD, id 6)
[ 62.501] (**) Option "xkb_rules" "evdev"
[ 62.501] (**) Option "xkb_model" "pc105"
[ 62.502] (**) Option "xkb_layout" "us"
[ 62.549] (II) config/udev: Adding input device Logitech M4848 (/dev/input/event3)
[ 62.553] (**) Logitech M4848: Applying InputClass "evdev pointer catchall"
[ 62.554] (II) Using input driver 'evdev' for 'Logitech M4848'
[ 62.554] (**) Logitech M4848: always reports core events
[ 62.559] (**) evdev: Logitech M4848: Device: "/dev/input/event3"
[ 62.559] (--) evdev: Logitech M4848: Vendor 0x5ac Product 0x301
[ 62.564] (--) evdev: Logitech M4848: Found 1 mouse buttons
[ 62.564] (--) evdev: Logitech M4848: Found relative axes
[ 62.564] (--) evdev: Logitech M4848: Found x and y relative axes
[ 62.565] (II) evdev: Logitech M4848: Configuring as mouse
[ 62.565] (**) evdev: Logitech M4848: YAxisMapping: buttons 4 and 5
[ 62.565] (**) evdev: Logitech M4848: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.565] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3/event3"
[ 62.566] (II) XINPUT: Adding extended input device "Logitech M4848" (type: MOUSE, id 7)
[ 62.574] (II) evdev: Logitech M4848: initialized for relative axes.
[ 62.589] (**) Logitech M4848: (accel) keeping acceleration scheme 1
[ 62.593] (**) Logitech M4848: (accel) acceleration profile 0
[ 62.593] (**) Logitech M4848: (accel) acceleration factor: 2.000
[ 62.593] (**) Logitech M4848: (accel) acceleration threshold: 4
[ 62.606] (II) config/udev: Adding input device Logitech M4848 (/dev/input/mouse0)
[ 62.631] (II) No input driver specified, ignoring this device.
[ 62.631] (II) This device may have been added with another device file.
[ 62.795] (II) config/udev: Adding input device PMU (/dev/input/event0)
[ 62.805] (**) PMU: Applying InputClass "evdev keyboard catchall"
[ 62.805] (II) Using input driver 'evdev' for 'PMU'
[ 62.805] (**) PMU: always reports core events
[ 62.813] (**) evdev: PMU: Device: "/dev/input/event0"
[ 62.815] (--) evdev: PMU: Vendor 0x1 Product 0x1
[ 62.815] (--) evdev: PMU: Found keys
[ 62.815] (II) evdev: PMU: Configuring as keyboard
[ 62.823] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 62.830] (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD, id 8)
[ 62.831] (**) Option "xkb_rules" "evdev"
[ 62.831] (**) Option "xkb_model" "pc105"
[ 62.831] (**) Option "xkb_layout" "us"
[ 62.878] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event4)
[ 62.886] (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
[ 62.890] (II) Using input driver 'evdev' for 'Macintosh mouse button emulation'
[ 62.890] (**) Macintosh mouse button emulation: always reports core events
[ 62.895] (**) evdev: Macintosh mouse button emulation: Device: "/dev/input/event4"
[ 62.895] (--) evdev: Macintosh mouse button emulation: Vendor 0x1 Product 0x1
[ 62.901] (--) evdev: Macintosh mouse button emulation: Found 3 mouse buttons
[ 62.901] (--) evdev: Macintosh mouse button emulation: Found relative axes
[ 62.901] (--) evdev: Macintosh mouse button emulation: Found x and y relative axes
[ 62.902] (II) evdev: Macintosh mouse button emulation: Configuring as mouse
[ 62.902] (**) evdev: Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 62.902] (**) evdev: Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.908] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[ 62.909] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE, id 9)
[ 62.909] (II) evdev: Macintosh mouse button emulation: initialized for relative axes.
[ 62.922] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 62.928] (**) Macintosh mouse button emulation: (accel) acceleration profile 0
[ 62.928] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 62.928] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 62.931] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse1)
[ 62.931] (II) No input driver specified, ignoring this device.
[ 62.947] (II) This device may have been added with another device file.
[ 63.404] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/mouse2)
[ 63.408] (II) No input driver specified, ignoring this device.
[ 63.409] (II) This device may have been added with another device file.
[ 65.306] (II) config/udev: Adding input device Mouseemu virtual keyboard (/dev/input/event5)
[ 65.307] (**) Mouseemu virtual keyboard: Applying InputClass "evdev keyboard catchall"
[ 65.307] (II) Using input driver 'evdev' for 'Mouseemu virtual keyboard'
[ 65.307] (**) Mouseemu virtual keyboard: always reports core events
[ 65.309] (**) evdev: Mouseemu virtual keyboard: Device: "/dev/input/event5"
[ 65.310] (--) evdev: Mouseemu virtual keyboard: Vendor 0x1f Product 0x1f
[ 65.310] (--) evdev: Mouseemu virtual keyboard: Found keys
[ 65.310] (II) evdev: Mouseemu virtual keyboard: Configuring as keyboard
[ 65.310] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 65.311] (II) XINPUT: Adding extended input device "Mouseemu virtual keyboard" (type: KEYBOARD, id 10)
[ 65.311] (**) Option "xkb_rules" "evdev"
[ 65.311] (**) Option "xkb_model" "pc105"
[ 65.332] (**) Option "xkb_layout" "us"
[ 65.365] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/event6)
[ 65.366] (**) Mouseemu virtual mouse: Applying InputClass "evdev pointer catchall"
[ 65.366] (II) Using input driver 'evdev' for 'Mouseemu virtual mouse'
[ 65.366] (**) Mouseemu virtual mouse: always reports core events
[ 65.366] (**) evdev: Mouseemu virtual mouse: Device: "/dev/input/event6"
[ 65.367] (--) evdev: Mouseemu virtual mouse: Vendor 0x1f Product 0x1e
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found 15 mouse buttons
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found scroll wheel(s)
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found relative axes
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found x and y relative axes
[ 65.367] (II) evdev: Mouseemu virtual mouse: Configuring as mouse
[ 65.377] (II) evdev: Mouseemu virtual mouse: Adding scrollwheel support
[ 65.377] (**) evdev: Mouseemu virtual mouse: YAxisMapping: buttons 4 and 5
[ 65.377] (**) evdev: Mouseemu virtual mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 65.377] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 65.378] (II) XINPUT: Adding extended input device "Mouseemu virtual mouse" (type: MOUSE, id 11)
[ 65.378] (II) evdev: Mouseemu virtual mouse: initialized for relative axes.
[ 65.396] (**) Mouseemu virtual mouse: (accel) keeping acceleration scheme 1
[ 65.396] (**) Mouseemu virtual mouse: (accel) acceleration profile 0
[ 65.397] (**) Mouseemu virtual mouse: (accel) acceleration factor: 2.000
[ 65.397] (**) Mouseemu virtual mouse: (accel) acceleration threshold: 4
My nice MBA got rained on the other day, so I'm stuck with what appears to be a second edition, "five-flavours," PowerPC "Firewire" iMac, http://lowendmac.com/1999/400-mhz-imac-dv-late-1999 . I've run ubuntu 13.10 on it just fine before, X11 working and all. But support on that release ended some time ago, so I reinstalled the machine with 14.04.
X11 is now broken. The screen on virtual console 7 is just black. I can switch to other virtual consoles and see text and the system is otherwise running fine. I've tried a number of the remedies listed on various forums with no real results, so after all that tweaking I reinstalled 14.04 once again to start from a freshly-installed system. I did run apt-get update and upgrade to bring things up to current. Please see Xorg.0.log below.
Would anyone happen to be familiar with this failure mode, or do I need to become an expert?
thx
jake
root@bluthing:~# !!
cat /var/log/Xorg.0.log
[ 58.915]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 58.915] X Protocol Version 11, Revision 0
[ 58.934] Build Operating System: Linux 3.13.0-45-powerpc64-smp ppc Ubuntu
[ 58.934] Current Operating System: Linux bluthing 3.13.0-24-powerpc-smp #47-Ubuntu SMP Sat May 3 02:03:13 UTC 2014 ppc
[ 58.934] Kernel command line: root=UUID=f3500dc8-f781-499f-856c-5e81193afaf5 ro quiet splash
[ 58.935] Build Date: 12 February 2015 02:53:48PM
[ 58.935] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[ 58.935] Current version of pixman: 0.30.2
[ 58.935] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 58.935] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 58.966] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 3 21:19:52 2015
[ 59.000] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 59.021] (==) No Layout section. Using the first Screen section.
[ 59.022] (==) No screen section available. Using defaults.
[ 59.022] (**) |-->Screen "Default Screen Section" (0)
[ 59.022] (**) | |-->Monitor "<default monitor>"
[ 59.034] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 59.045] (**) | |-->Device "Card0"
[ 59.045] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 59.045] (==) Automatically adding devices
[ 59.045] (==) Automatically enabling devices
[ 59.045] (==) Automatically adding GPU devices
[ 59.056] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 59.057] Entry deleted from font path.
[ 59.057] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 59.057] Entry deleted from font path.
[ 59.057] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 59.068] Entry deleted from font path.
[ 59.068] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 59.068] Entry deleted from font path.
[ 59.068] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 59.069] Entry deleted from font path.
[ 59.069] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 59.069] (==) ModulePath set to "/usr/lib/powerpc-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 59.069] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 59.069] (II) Loader magic: 0x20837694
[ 59.069] (II) Module ABI versions:
[ 59.076] X.Org ANSI C Emulation: 0.4
[ 59.076] X.Org Video Driver: 15.0
[ 59.077] X.Org XInput driver : 20.0
[ 59.077] X.Org Server Extension : 8.0
[ 59.122] (--) PCI:*(0:0:16:0) 1002:5052:1002:5052 rev 0, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[ 59.137] Initializing built-in extension Generic Event Extension
[ 59.137] Initializing built-in extension SHAPE
[ 59.137] Initializing built-in extension MIT-SHM
[ 59.137] Initializing built-in extension XInputExtension
[ 59.138] Initializing built-in extension XTEST
[ 59.138] Initializing built-in extension BIG-REQUESTS
[ 59.138] Initializing built-in extension SYNC
[ 59.138] Initializing built-in extension XKEYBOARD
[ 59.138] Initializing built-in extension XC-MISC
[ 59.138] Initializing built-in extension SECURITY
[ 59.151] Initializing built-in extension XINERAMA
[ 59.153] Initializing built-in extension XFIXES
[ 59.153] Initializing built-in extension RENDER
[ 59.153] Initializing built-in extension RANDR
[ 59.153] Initializing built-in extension COMPOSITE
[ 59.153] Initializing built-in extension DAMAGE
[ 59.154] Initializing built-in extension MIT-SCREEN-SAVER
[ 59.154] Initializing built-in extension DOUBLE-BUFFER
[ 59.154] Initializing built-in extension RECORD
[ 59.154] Initializing built-in extension DPMS
[ 59.154] Initializing built-in extension Present
[ 59.165] Initializing built-in extension DRI3
[ 59.165] Initializing built-in extension X-Resource
[ 59.165] Initializing built-in extension XVideo
[ 59.165] Initializing built-in extension XVideo-MotionCompensation
[ 59.165] Initializing built-in extension SELinux
[ 59.165] Initializing built-in extension XFree86-VidModeExtension
[ 59.165] Initializing built-in extension XFree86-DGA
[ 59.166] Initializing built-in extension XFree86-DRI
[ 59.166] Initializing built-in extension DRI2
[ 59.166] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 59.166] (II) "glx" will be loaded by default.
[ 59.166] (WW) "xmir" is not to be loaded by default. Skipping.
[ 59.166] (II) LoadModule: "glx"
[ 59.213] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.501] (II) Module glx: vendor="X.Org Foundation"
[ 59.501] compiled for 1.15.1, module version = 1.0.0
[ 59.502] ABI class: X.Org Server Extension, version 8.0
[ 59.502] (==) AIGLX enabled
[ 59.502] Loading extension GLX
[ 59.502] (II) LoadModule: "r128"
[ 59.530] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 59.531] (II) Module r128: vendor="X.Org Foundation"
[ 59.531] compiled for 1.15.0, module version = 6.9.2
[ 59.531] Module class: X.Org Video Driver
[ 59.531] ABI class: X.Org Video Driver, version 15.0
[ 59.554] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 59.582] (++) using VT number 7
[ 59.585] (II) R128(0): PCI bus 0 card 16 func 0
[ 59.585] (II) R128(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 59.585] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[ 59.585] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 59.586] (==) R128(0): Default visual is TrueColor
[ 59.586] (**) R128(0): Option "UseFBDev" "False"
[ 59.586] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
[ 59.586] (==) R128(0): RGB weight 888
[ 59.586] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 59.587] (II) Loading sub module "int10"
[ 59.587] (II) LoadModule: "int10"
[ 59.599] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 59.612] (II) Module int10: vendor="X.Org Foundation"
[ 59.612] compiled for 1.15.1, module version = 1.0.0
[ 59.612] ABI class: X.Org Video Driver, version 15.0
[ 59.613] (II) R128(0): initializing int10
[ 59.622] (**) R128(0): Option "NoINT10" "True"
[ 59.623] (--) R128(0): Chipset: "ATI Rage 128 Pro VR PR (PCI)" (ChipID = 0x5052)
[ 59.623] (--) R128(0): Linear framebuffer at 0x94000000
[ 59.623] (--) R128(0): MMIO registers at 0x90000000
[ 59.628] (--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
[ 59.628] (**) R128(0): Using external CRT for display
[ 59.629] (WW) R128(0): Failed to read PCI ROM!
[ 59.638] (WW) R128(0): Video BIOS not found!
[ 59.638] (II) R128(0): Primary Display == Type 3
[ 59.638] (WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
[ 59.639] (II) R128(0): PLL parameters: rf=2950 rd=26 min=12500 max=25000; xclk=7150
[ 59.639] (II) Loading sub module "ddc"
[ 59.639] (II) LoadModule: "ddc"
[ 59.650] (II) Module "ddc" already built-in
[ 59.651] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 59.659] (II) Loading sub module "i2c"
[ 59.659] (II) LoadModule: "i2c"
[ 59.659] (II) Module "i2c" already built-in
[ 59.665] (II) R128(0): I2C bus "DDC" initialized.
[ 59.666] (II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
[ 59.682] (EE) R128(0): No DFP detected
[ 59.693] (II) R128(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 59.693] (II) R128(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 59.693] (II) R128(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 59.694] (WW) R128(0): Unable to estimate virtual size
[ 59.694] (II) R128(0): Clock range: 12.50 to 250.00 MHz
[ 59.694] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[ 59.694] (II) R128(0): Not using default mode "320x175" (vrefresh out of range)
[ 59.694] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[ 59.703] (II) R128(0): Not using default mode "320x200" (vrefresh out of range)
[ 59.703] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[ 59.703] (II) R128(0): Not using default mode "360x200" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 59.711] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 59.719] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 59.728] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.728] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 59.730] (II) R128(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 59.731] (II) R128(0): Not using default mode "512x384i" (vrefresh out of range)
[ 59.731] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 59.731] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.737] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 59.738] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 59.748] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 59.748] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 59.748] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.749] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 59.750] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 59.750] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 59.750] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 59.751] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 59.751] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 59.751] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 59.751] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 59.771] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "416x312" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.774] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.775] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 59.789] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 59.789] (II) R128(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 59.790] (II) R128(0): Not using default mode "1360x768" (mode clock too high)
[ 59.790] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.790] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "1440x900" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "720x450" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "1600x1024" (hsync out of range)
[ 59.791] (II) R128(0): Not using default mode "800x512" (hsync out of range)
[ 59.805] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.805] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.805] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 59.806] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "1920x1080" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "960x540" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "1920x1200" (insufficient memory for mode)
[ 59.807] (II) R128(0): Not using default mode "960x600" (hsync out of range)
[ 59.807] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 59.816] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 59.816] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 59.816] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.817] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 59.817] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.817] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 59.817] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 59.817] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[ 59.817] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 59.818] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 59.818] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 59.818] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 59.818] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 59.818] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 59.818] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 59.819] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 59.819] (**) R128(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 59.819] (II) R128(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 59.819] (**) R128(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 59.819] (II) R128(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 59.819] (**) R128(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 59.837] (II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 59.837] (**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 59.837] (II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 59.837] (**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 59.838] (II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 59.838] (**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[ 59.838] (II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 59.838] (==) R128(0): DPI set to (96, 96)
[ 59.838] (II) Loading sub module "fb"
[ 59.838] (II) LoadModule: "fb"
[ 59.865] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 59.879] (II) Module fb: vendor="X.Org Foundation"
[ 59.879] compiled for 1.15.1, module version = 1.0.0
[ 59.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.879] (II) Loading sub module "ramdac"
[ 59.890] (II) LoadModule: "ramdac"
[ 59.892] (II) Module "ramdac" already built-in
[ 59.895] (II) Loading sub module "shadowfb"
[ 59.896] (II) LoadModule: "shadowfb"
[ 59.911] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 59.925] (II) Module shadowfb: vendor="X.Org Foundation"
[ 59.925] compiled for 1.15.1, module version = 1.0.0
[ 59.926] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.926] (II) R128(0): Page flipping disabled
[ 59.926] (!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 59.926] (--) Depth 24 pixmap format is 32 bpp
[ 59.939] (II) R128(0): Acceleration of RENDER operations will be enabled upon successful loading of DRI and EXA
[ 59.954] (WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
[ 59.955] (II) R128(0): Filling in EXA memory info
[ 59.955] (II) R128(0): Loading EXA module...
[ 59.955] (II) Loading sub module "exa"
[ 59.955] (II) LoadModule: "exa"
[ 59.968] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 59.970] (II) Module exa: vendor="X.Org Foundation"
[ 59.970] compiled for 1.15.1, module version = 2.6.0
[ 59.982] ABI class: X.Org Video Driver, version 15.0
[ 59.982] (II) R128(0): Allocating EXA driver...
[ 59.983] (II) R128(0): Acceleration enabled
[ 59.983] (II) R128(0): Filled in offs
[ 59.983] (II) R128(0): Going to init EXA...
[ 59.983] (II) R128(0): Setting up EXA callbacks
[ 59.983] (II) R128(0): Initalizing 2D acceleration engine...
[ 59.990] (II) R128(0): Initializing EXA driver...
[ 59.991] (II) EXA(0): Offscreen pixmap area of 5242880 bytes
[ 59.991] (II) EXA(0): Driver registered support for the following operations:
[ 59.991] (II) Solid
[ 59.996] (II) Copy
[ 59.996] (II) R128(0): EXA Acceleration enabled
[ 59.998] (==) R128(0): Backing store enabled
[ 59.998] (==) R128(0): Silken mouse enabled
[ 60.001] (II) R128(0): Using hardware cursor (scanline 8190)
[ 60.024] (==) R128(0): DPMS enabled
[ 60.025] (WW) R128(0): Direct rendering disabled
[ 60.025] (==) RandR enabled
[ 60.558] (II) SELinux: Disabled on system
[ 60.631] (II) AIGLX: Screen 0 is not DRI2 capable
[ 60.643] (EE) AIGLX: reverting to software rendering
[ 61.090] (II) AIGLX: Loaded and initialized swrast
[ 61.094] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 62.123] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 62.392] (II) config/udev: Adding input device PowerMac Beep (/dev/input/event1)
[ 62.394] (II) No input driver specified, ignoring this device.
[ 62.394] (II) This device may have been added with another device file.
[ 62.425] (II) config/udev: Adding input device Mitsumi Electric Apple USB Keyboard (/dev/input/event2)
[ 62.433] (**) Mitsumi Electric Apple USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.434] (II) LoadModule: "evdev"
[ 62.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.487] (II) Module evdev: vendor="X.Org Foundation"
[ 62.487] compiled for 1.15.0, module version = 2.8.2
[ 62.488] Module class: X.Org XInput Driver
[ 62.488] ABI class: X.Org XInput driver, version 20.0
[ 62.488] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple USB Keyboard'
[ 62.489] (**) Mitsumi Electric Apple USB Keyboard: always reports core events
[ 62.489] (**) evdev: Mitsumi Electric Apple USB Keyboard: Device: "/dev/input/event2"
[ 62.489] (--) evdev: Mitsumi Electric Apple USB Keyboard: Vendor 0x5ac Product 0x201
[ 62.490] (--) evdev: Mitsumi Electric Apple USB Keyboard: Found keys
[ 62.490] (II) evdev: Mitsumi Electric Apple USB Keyboard: Configuring as keyboard
[ 62.490] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event2"
[ 62.501] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple USB Keyboard" (type: KEYBOARD, id 6)
[ 62.501] (**) Option "xkb_rules" "evdev"
[ 62.501] (**) Option "xkb_model" "pc105"
[ 62.502] (**) Option "xkb_layout" "us"
[ 62.549] (II) config/udev: Adding input device Logitech M4848 (/dev/input/event3)
[ 62.553] (**) Logitech M4848: Applying InputClass "evdev pointer catchall"
[ 62.554] (II) Using input driver 'evdev' for 'Logitech M4848'
[ 62.554] (**) Logitech M4848: always reports core events
[ 62.559] (**) evdev: Logitech M4848: Device: "/dev/input/event3"
[ 62.559] (--) evdev: Logitech M4848: Vendor 0x5ac Product 0x301
[ 62.564] (--) evdev: Logitech M4848: Found 1 mouse buttons
[ 62.564] (--) evdev: Logitech M4848: Found relative axes
[ 62.564] (--) evdev: Logitech M4848: Found x and y relative axes
[ 62.565] (II) evdev: Logitech M4848: Configuring as mouse
[ 62.565] (**) evdev: Logitech M4848: YAxisMapping: buttons 4 and 5
[ 62.565] (**) evdev: Logitech M4848: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.565] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3/event3"
[ 62.566] (II) XINPUT: Adding extended input device "Logitech M4848" (type: MOUSE, id 7)
[ 62.574] (II) evdev: Logitech M4848: initialized for relative axes.
[ 62.589] (**) Logitech M4848: (accel) keeping acceleration scheme 1
[ 62.593] (**) Logitech M4848: (accel) acceleration profile 0
[ 62.593] (**) Logitech M4848: (accel) acceleration factor: 2.000
[ 62.593] (**) Logitech M4848: (accel) acceleration threshold: 4
[ 62.606] (II) config/udev: Adding input device Logitech M4848 (/dev/input/mouse0)
[ 62.631] (II) No input driver specified, ignoring this device.
[ 62.631] (II) This device may have been added with another device file.
[ 62.795] (II) config/udev: Adding input device PMU (/dev/input/event0)
[ 62.805] (**) PMU: Applying InputClass "evdev keyboard catchall"
[ 62.805] (II) Using input driver 'evdev' for 'PMU'
[ 62.805] (**) PMU: always reports core events
[ 62.813] (**) evdev: PMU: Device: "/dev/input/event0"
[ 62.815] (--) evdev: PMU: Vendor 0x1 Product 0x1
[ 62.815] (--) evdev: PMU: Found keys
[ 62.815] (II) evdev: PMU: Configuring as keyboard
[ 62.823] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 62.830] (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD, id 8)
[ 62.831] (**) Option "xkb_rules" "evdev"
[ 62.831] (**) Option "xkb_model" "pc105"
[ 62.831] (**) Option "xkb_layout" "us"
[ 62.878] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event4)
[ 62.886] (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
[ 62.890] (II) Using input driver 'evdev' for 'Macintosh mouse button emulation'
[ 62.890] (**) Macintosh mouse button emulation: always reports core events
[ 62.895] (**) evdev: Macintosh mouse button emulation: Device: "/dev/input/event4"
[ 62.895] (--) evdev: Macintosh mouse button emulation: Vendor 0x1 Product 0x1
[ 62.901] (--) evdev: Macintosh mouse button emulation: Found 3 mouse buttons
[ 62.901] (--) evdev: Macintosh mouse button emulation: Found relative axes
[ 62.901] (--) evdev: Macintosh mouse button emulation: Found x and y relative axes
[ 62.902] (II) evdev: Macintosh mouse button emulation: Configuring as mouse
[ 62.902] (**) evdev: Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 62.902] (**) evdev: Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.908] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[ 62.909] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE, id 9)
[ 62.909] (II) evdev: Macintosh mouse button emulation: initialized for relative axes.
[ 62.922] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 62.928] (**) Macintosh mouse button emulation: (accel) acceleration profile 0
[ 62.928] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 62.928] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 62.931] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse1)
[ 62.931] (II) No input driver specified, ignoring this device.
[ 62.947] (II) This device may have been added with another device file.
[ 63.404] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/mouse2)
[ 63.408] (II) No input driver specified, ignoring this device.
[ 63.409] (II) This device may have been added with another device file.
[ 65.306] (II) config/udev: Adding input device Mouseemu virtual keyboard (/dev/input/event5)
[ 65.307] (**) Mouseemu virtual keyboard: Applying InputClass "evdev keyboard catchall"
[ 65.307] (II) Using input driver 'evdev' for 'Mouseemu virtual keyboard'
[ 65.307] (**) Mouseemu virtual keyboard: always reports core events
[ 65.309] (**) evdev: Mouseemu virtual keyboard: Device: "/dev/input/event5"
[ 65.310] (--) evdev: Mouseemu virtual keyboard: Vendor 0x1f Product 0x1f
[ 65.310] (--) evdev: Mouseemu virtual keyboard: Found keys
[ 65.310] (II) evdev: Mouseemu virtual keyboard: Configuring as keyboard
[ 65.310] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 65.311] (II) XINPUT: Adding extended input device "Mouseemu virtual keyboard" (type: KEYBOARD, id 10)
[ 65.311] (**) Option "xkb_rules" "evdev"
[ 65.311] (**) Option "xkb_model" "pc105"
[ 65.332] (**) Option "xkb_layout" "us"
[ 65.365] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/event6)
[ 65.366] (**) Mouseemu virtual mouse: Applying InputClass "evdev pointer catchall"
[ 65.366] (II) Using input driver 'evdev' for 'Mouseemu virtual mouse'
[ 65.366] (**) Mouseemu virtual mouse: always reports core events
[ 65.366] (**) evdev: Mouseemu virtual mouse: Device: "/dev/input/event6"
[ 65.367] (--) evdev: Mouseemu virtual mouse: Vendor 0x1f Product 0x1e
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found 15 mouse buttons
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found scroll wheel(s)
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found relative axes
[ 65.367] (--) evdev: Mouseemu virtual mouse: Found x and y relative axes
[ 65.367] (II) evdev: Mouseemu virtual mouse: Configuring as mouse
[ 65.377] (II) evdev: Mouseemu virtual mouse: Adding scrollwheel support
[ 65.377] (**) evdev: Mouseemu virtual mouse: YAxisMapping: buttons 4 and 5
[ 65.377] (**) evdev: Mouseemu virtual mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 65.377] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 65.378] (II) XINPUT: Adding extended input device "Mouseemu virtual mouse" (type: MOUSE, id 11)
[ 65.378] (II) evdev: Mouseemu virtual mouse: initialized for relative axes.
[ 65.396] (**) Mouseemu virtual mouse: (accel) keeping acceleration scheme 1
[ 65.396] (**) Mouseemu virtual mouse: (accel) acceleration profile 0
[ 65.397] (**) Mouseemu virtual mouse: (accel) acceleration factor: 2.000
[ 65.397] (**) Mouseemu virtual mouse: (accel) acceleration threshold: 4